Materials

  • 11 - 2x4x8
  • 3 - 2x6-8
  • 2 - 2x8x8
  • 2 1/2 in spax screws
  • 2 1/2 in pocket hole screws
  • pocket hole plugs
  • wood glue
  • wood filler
  • sand paper
  • kreg jig
  • miter saw
  • sander
  • drill
  • stain
  • seat cushions

Cuts/Directions

Seat

  • 10 - 2x4 @ 22 in (middle at 1 3/4 in apart (PH each end or use spax screws)
  • 2 - 2x4 @ 29 1/2 in (sides) (leave 3 3/4 in from ends)
  • 1 - 2x4 @ 24 1/4 in (middle)
  • 1 - 2x4 @ 48 1/2 in (front) (PH or spax screws)
  • 1 - 2x4 @ 45 1/2 in (back) (PH or spax screws)

Back

  • 10 - 2x4 @ 22 in (middle and bottom)
  • 3 - 2x4 @ 19 3/4 in (-1.5 when beveled at 10 degrees)
  • 1 - 2x4 @ 48 1/2 in (top)

Legs

  • 2 - 2x6 @ 26 in (sides) (PH top)
  • 2 - 2x6 @ 31 in (top)
  • 2 - 2x6 @ 28 in (bottom) (PH underneath)
  • 4 - 2x8 @ 28 in (inside legs) (PH both ends) (place inside legs 2 5/8 inches from top and second piece 5 inches from this piece)

Frame without pillows