Materials
  • 2 - 1/2" 4'x8' MDF boards (cut into 12" wide strips). I had The Home Depot make the cuts
  • 1 1/4 brad nails

‍

Tools
  • Brad Nailer
  • Router and 3/8 round over bit
  • Saw (to cut to fit length of the wall)

‍

Directions
  • Measure length of you wall then cut the 12" boards to fit. I recommend measuring as you go because the wall may be uneven.
  • After the cuts are made, use the router to round both sides of each 12" board
  • Attach to the wall with brad nailer (Note: I don't use adhesive but it's an option)

‍