Materials
- 2 - 1x4x8
- 1 - 1x4x6
- 1 - 1x6x6
- 1 - 1x8x6
- 1 - 1x10x6
- wood glue
- 1 1/4 in brad nails
- 12 - 1 1/4 decorative screws
- stain
Tools
- Miter Saw
- Brad Nailer
- Drill
- Jigsaw
- Tape Measure
- Speed Square
- Sander
Cut List and Directions
Legs
- 2 - 1x4 @ 72 in
- use miter saw to bevel top/bottom of legs @ 10 degrees, ends are parallel
- top of legs - lean against the wall and use a speed square to mark the back where the shelf will sit against the wall. Use jigsaw to make the marked cut.
Shelves
Use Brad Nailer and glue to build shelves. Once shelves are built, attach to legs with glue and screws.
Top Shelf
- 1 - 1x6 @ 19 in (bottom of shelf)
- 1 - 1x4 @ 19 in (attach to 1x6 - first) this is the back of the shelf
- 2 - 1x4 @ 6.25 in (attach to sides)
Middle Shelf
- 1 - 1x8 @ 19 in (bottom of shelf)
- 1 - 1x4 @ 19 in (attach to 1x8 - first) this is the back of the shelf
- 2 - 1x4 @ 8 in (attach to sides)
Bottom Shelf
- 1 - 1x10 @ 19 in (bottom of shelf)
- 1 - 1x4 @ 19 in (attach to 1x10 - first) this is the back of the shelf
- 2 - 1x4 @ 10 in (attach to sides)
.jpg)